About Vector India
Vector India Interview Questions and Answers
Updated 21 Feb 2026Technical Support Specialist Interview Experience
Candidate: Karan Mehta
Experience Level: Entry-level
Applied Via: Walk-in interview
Difficulty: Easy
Final Result: Rejected
Interview Process
2
Questions Asked
- How do you handle an irate customer?
- Explain troubleshooting steps for a network issue.
- What is your experience with ticketing systems?
- Describe a time you resolved a difficult technical problem.
Advice
Improve your communication skills and gain more practical experience in technical support.
Full Experience
I attended a walk-in interview where the first round was a group discussion and the second was a one-on-one technical interview. The interviewers focused on customer service skills and basic technical knowledge. Unfortunately, I was not selected but received helpful feedback.
Quality Assurance Engineer Interview Experience
Candidate: Sneha Kulkarni
Experience Level: Mid-level
Applied Via: LinkedIn
Difficulty:
Final Result:
Interview Process
3
Questions Asked
- What is the difference between manual and automated testing?
- Describe your experience with Selenium.
- How do you write a test case?
- Explain bug life cycle.
- Have you worked with Agile methodologies?
Advice
Focus on both manual and automation testing concepts and be ready to explain your testing approach.
Full Experience
I applied via LinkedIn and had three rounds: a technical test, a technical interview, and an HR interview. The technical rounds focused on my testing skills and tools knowledge. The interviewers were professional and supportive throughout.
Project Manager Interview Experience
Candidate: Vikram Patel
Experience Level: Senior
Applied Via: Company website
Difficulty: Hard
Final Result:
Interview Process
4
Questions Asked
- Describe your experience managing cross-functional teams.
- How do you handle project scope changes?
- Explain risk management strategies you have used.
- Provide an example of a project that failed and what you learned.
- How do you prioritize tasks under tight deadlines?
Advice
Prepare detailed examples from your past projects and be ready to discuss leadership challenges.
Full Experience
Applied through the company website and underwent a rigorous selection process. The first round was an HR screening, followed by two technical interviews with senior management. The final round was a case study presentation. The process was challenging but fair.
Data Analyst Interview Experience
Candidate: Anita Desai
Experience Level: Entry-level
Applied Via: Referral
Difficulty: Easy
Final Result: Rejected
Interview Process
2
Questions Asked
- What is normalization in databases?
- Explain the difference between supervised and unsupervised learning.
- How do you handle missing data in a dataset?
- Describe your experience with Excel and SQL.
Advice
Gain more hands-on experience with SQL and data visualization tools before applying.
Full Experience
I was referred by a friend and had two rounds of interviews. The first was a basic technical round testing my knowledge of data concepts. The second was with the team lead focusing on practical scenarios. Although I was not selected, the interviewers provided constructive feedback.
Software Engineer Interview Experience
Candidate: Rahul Sharma
Experience Level: Mid-level
Applied Via: Online job portal
Difficulty:
Final Result:
Interview Process
3
Questions Asked
- Explain the concept of OOP and its principles.
- How do you manage memory in C++?
- Describe a challenging bug you fixed in your previous job.
- Write a function to reverse a linked list.
- What is the difference between REST and SOAP APIs?
Advice
Brush up on data structures and algorithms, and be ready to discuss your past projects in detail.
Full Experience
I applied through an online job portal and was shortlisted for a technical interview. The first round was a coding test focusing on data structures. The second round was a technical interview with senior developers discussing my experience and problem-solving skills. The final round was with HR focusing on cultural fit. The process was smooth and the interviewers were friendly.
Frequently Asked Questions in Vector India
Have a question about the hiring process, company policies, or work environment? Ask the community or browse existing questions here.
Common Interview Questions in Vector India
Q: In a sports contest there were m medals awarded on n successive days (n > 1). 1. On the first day 1 medal and 1/7 of the remaining m - 1 medals were awarded. 2. On the second day 2 medals and 1/7 of the now remaining medals was awarded; and so on.On the nth and last day, the remaining n medals were awarded.How many days did the contest last, and how many medals were awarded altogether?
Q: 9 cards are there. You have to arrange them in a 3*3 matrix. Cards are of 4 colors. They are red, yellow, blue and green. Conditions for arrangement: one red card must be in first row or second row. 2 green cards should be in 3rd column. Yellow cards must be in the 3 corners only. Two blue cards must be in the 2nd row. At least one green card in each row.
Q: There are 3 clans in an island - The Arcs who never lie, the Dons who always lie and the Slons who lie alternately with the truth. Once a tourist meets 2 guides who stress that the other is a Slon. They proceed on a tour and see a sports meet. The first guide says that the prizes have been won in the order Don, Arc, Slon. The other says that, the order is Slon, Don, Arc. (the order need not be exact). To which clan did each of the guides and the players belong? ...
Q: 36 people {a1, a2, ..., a36} meet and shake hands in a circular fashion. In other words, there are totally 36 handshakes involving the pairs, {a1, a2}, {a2, a3}, ..., {a35, a36}, {a36, a1}. Then size of the smallest set of people such that the res...
Q: The citizens of planet nigiet are 8 fingered and have thus developed their decimal system in base 8. A certain street in nigiet contains 1000 (in base 8) buildings numbered 1 to 1000. How many 3s are used in numbering these buildings?
Q: A light bulb is hanging in a room. Outside of the room there are three switches, of which only one is connected to the lamp. In the starting situation, all switches are 'off' and the bulb is not lit. If it is allowed to check in the room only once.How would you know which is the switch?
Q: At 6?o a clock ticks 6 times.The time between first and last ticks is 30 seconds.How long does it tick at 12?o clock?2.A hotel has 10 storey. Which floor is above the floor below the floor, below the floor above the floor, below the floor above the fifth.
Q: There is a room with a door (closed) and three light bulbs. Outside the room there are three switches, connected to the bulbs. You may manipulate the switches as you wish, but once you open the door you can't change them. Identify each switch with its bulb.
Q: The egg vendor calls on his first customer and sells half his eggs and half an egg. To the second customer, he sells half of what he had left and half an egg and to the third customer he sells half of what he had then left and half an egg. By the way he did not break any eggs. In the end three eggs were remaining . How many total eggs he was having ?
Q: If I walk with 30 miles/hr i reach 1 hour before and if i walk with 20 miles/hr i reach 1 hour late. Find the distance between 2 points and the exact time of reaching destination is 11 am then find the speed with which it walks.
Q: There are four dogs/ants/people at four corners of a square of unit distance. At the same instant all of them start running with unit speed towards the person on their clockwise direction and will always run towards that target. How long does it take for them to meet and where?
Q: In a country where everyone wants a boy, each family continues having babies till they have a boy. After some time, what is the proportion of boys to girls in the country? (Assuming probability of having a boy or a girl is the same)
Q: A person meets a train at a railway station coming daily at a particular time. One day he is late by 25 minutes, and he meets the train 5 k.m. before the station. If his speed is 12 kmph, what is the speed of the train.
Q: Joe started from Bombay towards Pune and her friend julie in opposite direction. they met at a point . distance traveled by joe was 1.8 miles more than that of julie.after spending some both started there way. joe reaches in 2 hours while julie in 3.5 hours.Assuming both were traveling with constant speed. What is the distance between the two cities.
Q: In mathematics country 1,2,3,4....,8,9 are nine cities. Cities which form a no. that is divisible by 3 are connected by air planes. (e.g. cities 1 & 2 form no. 12 which divisible by 3 then 1 is connected to city 2). Find the total no. of ways you can go to 8 if you are allowed to break the journeys.
Q: Four persons have to cross the bridge they are having one torch light. Four persons take 1,2,5,10 minutes respectively, when two persons are going they will take the time of the slowest person. What is the time taken to cross by all of them.
Q: In a certain year, the number of girls who graduated from City High School was twice the number of boys. If 3/4 of the girls and 5/6 of the boys went to college immediately after graduation, what fraction of the graduates that year went to college immediately after graduation?
Q: There are 4 cars . They all are coming from different directions. They have to cross through one square.They all arrive at the same time. Nobody stops . still there is no clash .note : They all are driving at a speed if 100 km/hr.
Q: A is driving on a highway when the police fines him for over speeding and exceeding the limit by 10 km/hr. At the same time B is fined for over speeding by twice the amount by which A exceeded the limit. If he was driving at 35 km/hr what is the speed limit for the road?
Q: A 31" x 31" square metal plate needs to be fixed by a carpenter on to a wooden board. The carpenter uses nails all along the edges of the square such that there are 32 nails on each side of the square. Each nail is at the same distance from the neighboring nails. How many nails does the carpenter use?Â