Scan It Up - Smart QR Tags

integra micro systems Recruitment Process, Interview Questions & Answers

Integra Micro Systems interview typically involves a technical round focusing on core electronics concepts followed by an HR discussion. Candidates can expect problem-solving questions and a practical evaluation of skills relevant to embedded systems.
4.3
based on 50 Reviews
About Company
Interview Guide
Interviews Experiance
FAQ's Questions

About integra micro systems

integra micro systems Interview Questions and Answers

Updated 21 Feb 2026

Quality Assurance Engineer Interview Experience

Candidate: Sanjay Kumar

Experience Level: Mid-level

Applied Via: Company website

Difficulty:

Final Result: Rejected

Interview Process

3

Questions Asked

  • What is the difference between manual and automated testing?
  • Describe a bug lifecycle.
  • How do you write test cases?
  • Explain regression testing.
  • What tools have you used for automation?

Advice

Gain hands-on experience with automation tools and be ready to discuss testing strategies in detail.

Full Experience

Applied through the company website and underwent an initial HR round, followed by a technical interview focusing on QA concepts and tools. The final round was a practical test where I had to write test cases for a sample application. Although I performed well, I was not selected due to limited automation experience.

Project Manager Interview Experience

Candidate: Priya Singh

Experience Level: Senior

Applied Via: LinkedIn application

Difficulty:

Final Result:

Interview Process

3

Questions Asked

  • How do you manage project timelines?
  • Describe a project you led successfully.
  • How do you handle team conflicts?
  • What project management tools do you use?
  • Explain risk management in projects.

Advice

Highlight leadership experiences and be prepared with examples of project successes and challenges.

Full Experience

Applied via LinkedIn and was contacted for a phone screening. The second round was a technical interview focusing on project management methodologies. The final round was with senior management discussing leadership style and company fit. The interviewers were professional and the process was well-organized.

Technical Support Engineer Interview Experience

Candidate: Rohit Verma

Experience Level: Entry-level

Applied Via: Campus recruitment

Difficulty: Easy

Final Result:

Interview Process

2

Questions Asked

  • What is troubleshooting?
  • How do you handle difficult customers?
  • Explain TCP/IP basics.
  • Describe your internship experience.
  • Why do you want to work here?

Advice

Be confident and clear in communication; emphasize customer service skills.

Full Experience

The campus recruitment process was straightforward with an initial written test followed by an interview. The interview focused on communication skills and basic technical knowledge. The environment was supportive and the interviewers encouraged me to share my experiences.

Systems Analyst Interview Experience

Candidate: Neha Gupta

Experience Level: Senior

Applied Via: Employee referral

Difficulty:

Final Result: Rejected

Interview Process

4

Questions Asked

  • Explain system development life cycle.
  • How do you gather requirements from stakeholders?
  • Describe a time you resolved a conflict in a project.
  • What tools do you use for system modeling?
  • How do you ensure system scalability?

Advice

Prepare real-life scenarios demonstrating your analytical and communication skills.

Full Experience

Referred by a current employee, I went through an initial HR round, a technical round focusing on systems analysis, a case study presentation, and a final managerial round. The case study was particularly challenging and required quick thinking. Despite good feedback, I was not selected due to a stronger candidate.

Software Engineer Interview Experience

Candidate: Amit Sharma

Experience Level: Mid-level

Applied Via: Online job portal

Difficulty:

Final Result:

Interview Process

3

Questions Asked

  • Explain OOP concepts.
  • What is polymorphism?
  • Describe a challenging bug you fixed.
  • Write a function to reverse a linked list.
  • How do you manage version control in your projects?

Advice

Brush up on data structures and practice coding problems before the interview.

Full Experience

I applied through a popular job portal and was contacted within a week. The first round was an HR screening, followed by a technical round focusing on programming and problem-solving. The final round was a discussion with the team lead about my previous projects and coding skills. The interviewers were friendly and the process was smooth.

View all interview questions

Frequently Asked Questions in integra micro systems

Have a question about the hiring process, company policies, or work environment? Ask the community or browse existing questions here.

Common Interview Questions in integra micro systems

Q: The citizens of planet nigiet are 8 fingered and have thus developed their decimal system in base 8. A certain street in nigiet contains 1000 (in base 8) buildings numbered 1 to 1000. How many 3s are used in numbering these buildings?

Q: There are 3 sticks placed at right angles to each other and a sphere is placed between the sticks . Now another sphere is placed in the gap between the sticks and Larger sphere . Find the radius of smaller sphere in terms of radius of larger sphere.

Q: ABCDE are sisters. Each of them gives 4 gifts and each receives 4 gifts No two sisters give the same combination ( e.g. if A gives 4 gifts to B then no other sisters can give four to other one.) (i) B gives four to A.(ii) C gives 3 to E. How much did A,B,C,E give to D?

Q: At 6?o a clock ticks 6 times.The time between first and last ticks is 30 seconds.How long does it tick at 12?o clock?2.A hotel has 10 storey. Which floor is above the floor below the floor, below the floor above the floor, below the floor above the fifth.

Q: There is a room with a door (closed) and three light bulbs. Outside the room there are three switches, connected to the bulbs. You may manipulate the switches as you wish, but once you open the door you can't change them. Identify each switch with its bulb.

Q: A long, long time ago, two Egyptian camel drivers were fighting for the hand of the daughter of the sheik of Abbudzjabbu. The sheik, who liked neither of these men to become the future husband of his daughter, came up with a clever plan: a race would dete

Q: Tom has three boxes with fruits in his barn: one box with apples, one box with pears, and one box with both apples and pears. The boxes have labels that describe the contents, but none of these labels is on the right box. How can Tom, by taking only one p

Q: A vessel is full of liquid. From the vessel, 1/3rd of the liquid evaporates on the first day. On the second day 3/4th of the remaining liquid evaporates. What fraction of the volume is present at the end of the second day

Q: There are 7 letters A,B,C,D,E,F,GAll are assigned some numbers from 1,2 to 7.B is in the middle if arranged as per the numbers.A is greater than G same as F is less than C.G comes earlier than E.Which is the fourth letter

Q: Give two dice - one is a standard dice, the other is blank (nothing painted on any of the faces). The problem is to paint the blank dice in such a manner so that when you roll both of them together, the sum of both the faces should lie between 1 and 12. Numbers from 1-12 (both inclusive) equally likely.

Q: If I walk with 30 miles/hr i reach 1 hour before and if i walk with 20 miles/hr i reach 1 hour late. Find the distance between 2 points and the exact time of reaching destination is 11 am then find the speed with which it walks.

Q: A family X went for a vacation. Unfortunately it rained for 13 days when they were there. But whenever it rained in the mornings, they had clear afternoons and vice versa. In all they enjoyed 11 mornings and 12 afternoons. How many days did they stay there totally?

Q: A person meets a train at a railway station coming daily at a particular time. One day he is late by 25 minutes, and he meets the train 5 k.m. before the station. If his speed is 12 kmph, what is the speed of the train.

Q: There are some chickens in a poultry. They are fed with corn. One sack of corn will come for 9 days. The farmer decides to sell some chickens and wanted to hold 12 chicken with him. He cuts the feed by 10% and sack of corn comes for 30...

Q: The profit made by a company in one year is enough to give 6% return on all shares. But as the preferred shares get on return of 7.5%, so the ordinary shares got on return of 5%. If the value of preferred shares is Rs 4,000000, then what is the va...

Q: Six persons A,B,C,D,E & F went to solider cinema. There are six consecutive seats. A sits in one of the seats followed by B, followed by C and soon. If a taken one of the six seats , then B should sit adjacent to A. C should sit adjacent A or B. D should sit adjacent to A, B,or C and soon. How many possibilities are there?

Q: In a certain year, the number of girls who graduated from City High School was twice the number of boys. If 3/4 of the girls and 5/6 of the boys went to college immediately after graduation, what fraction of the graduates that year went to college immediately after graduation?

Q: There are 4 cars . They all are coming from different directions. They have to cross through one square.They all arrive at the same time. Nobody stops . still there is no clash .note : They all are driving at a speed if 100 km/hr.

Q: A is driving on a highway when the police fines him for over speeding and exceeding the limit by 10 km/hr. At the same time B is fined for over speeding by twice the amount by which A exceeded the limit. If he was driving at 35 km/hr what is the speed limit for the road?

Q: A 31" x 31" square metal plate needs to be fixed by a carpenter on to a wooden board. The carpenter uses nails all along the edges of the square such that there are 32 nails on each side of the square. Each nail is at the same distance from the neighboring nails. How many nails does the carpenter use?Â