Since, there are 10 points on the circle and to draw a chord we need to connect any two points on the circle to make it a straight line, which implies that the number of chords = No of lines connecting any two points out of the 10 points
= 10C2 = 10*9/2 = 45 chords.
3 hours ago.
Thin candle melts 3/4 in 3 hours leaving 1/4
Where as in the same time thick candle melts 3/6 leaving 3/6 which is 1/2. Now thick candle is exactly twice than the thin candle.
Or via modeling:
We need to find time at which the length of the thin candle is half the thick candle. Let x be the time. Thin candle melts at 1/4 an hour and thick candle melts at 1/6 an hour. In x hours they melt at x/4 and x/6 respectively. What’s left will be 1 – x/4 and 1 – x/6. We need to find x at which :
2 * (1 – (x/4)) = 1 – (x/6)
This equation results in x = 3
512
B, 8mm x 5 mm = 40 mm^2
1000mm x 1000mm = 1,000,000mm^2
= 1,000,000 mm^2/40mm^2
= 25,000
9 AND 3
Cut it horizontally so both can have equal share and same in shape.
Let’s assume the length of each train is ‘L’ and the speeds of the two trains are ‘V₁’ and ‘V₂’ respectively.
When the trains are moving in the opposite direction, their relative speed is the sum of their individual speeds. The total distance they need to cover is the sum of their lengths. Since they cross each other completely in 5 seconds, we can set up the following equation:
(V₁ + V₂) × 5 = 2L
When the trains are moving in the same direction, their relative speed is the difference between their individual speeds. The total distance they need to cover is the difference between their lengths. Since they cross each other completely in 15 seconds, we can set up the following equation:
(V₁ – V₂) × 15 = 2L
Now, let’s solve these equations to find the ratio of their speeds.
From the first equation, we have:
(V₁ + V₂) × 5 = 2L
V₁ + V₂ = (2L) / 5
From the second equation, we have:
(V₁ – V₂) × 15 = 2L
V₁ – V₂ = (2L) / 15
Let’s add these two equations together:
V₁ + V₂ + V₁ – V₂ = (2L) / 5 + (2L) / 15
2V₁ = (6L + 2L) / 15
2V₁ = (8L) / 15
V₁ = (4L) / 15
So, the speed of the first train is (4L) / 15.
Now, let’s substitute this value back into the first equation to find V₂:
(4L) / 15 + V₂ = (2L) / 5
V₂ = (2L) / 5 – (4L) / 15
V₂ = (6L – 4L) / 15
V₂ = (2L) / 15
Therefore, the speed of the second train is (2L) / 15.
The ratio of their speeds is given by:
(V₁ / V₂) = ((4L) / 15) / ((2L) / 15)
(V₁ / V₂) = 4L / 2L
(V₁ / V₂) = 2
So, the ratio of their speeds is 2:1.
The ans is -20.
Solution:
A-1
B-2
C-3 D-4 …like wise till Z-26.
ELECTRICITY-5+12+5+3+20+18+9+3+9+20+25==129
GAS-7+1+9==27
ELECTRICITY-GAS=129-27-(Minus 2)=100
so
JACK-JILL=(10+1+3+11-(10+9+12+12)-(minus(2))==(-20)
Given:
Speed of man downstream= 30/3=10km/h
Speed of man in upstream=18/3=6km/h
Speed of man in still water=1/2 (speed of upstream+ speed of down stream)
= 1/2 (10+6)
=1/2*16
=8km/h
340