Acushnet Interview Questions, Process, and Tips

16

Turn on a switch and leave it for some ten minutes. Turn it off, turn a second one on and open the door and go into the room. The glowing bulb corresponds to second switch. The bulb that is hot corresponds to first switch, as it was turned on for ten minutes and have heated up. The cold and not-glowing bulb corresponds to the third switch

X filling rate is 1/18 or 4/72 per hour

Y filling rate is 1/24 or 3/72 per hour

Combined as a pair it’s 7/72 in a complete 2 hour alternating sequence

72+ 7/72 =10 sequences = 70/72 on 20 hours, The outstanding balance is just 2/72

So at 20.5 hours with X turn filling is 100% complete with 72/72

Answer: It will take 20.5 hours to completely fill this tank.

Analysis of measured filling process, from X = 42/72 share & from Y = 30/72 share

Each PAIR of stations means a PAIR of tickets (A to B and B to A)

2(old stations)(new stations) + 2(new stations)(new stations – 1) = 46

(N * X) + (X * (X – 1)) = 23

factoring ___ X (N + X – 1) = 23

23 is a prime number with only two factors, 1 and 23

so N = 23 and X = 1

speed = distence / time
60km/hr=distance / 9 sec
km / hr to m / s==> 60*1000 / 1* 3600 = 16.667
16.667*9 = distance
150 m is the answer

C. 21000

2hrs

it is based on the right shift operation on the perticular digit

1000 cu.m